Wallpaper Roll dimension (after opening the roll) : 10.05 mtrs x 53 cm = 57 Sqft,Wall Measurement approximation and roll requirement estimation: If a particular wall is 10 feet in height and 11 feet in length then the total area of the wall is 110 sqft. In that case if a roll is 57 sqft, the average utilization of a roll being 50 sqft (7 feet in height and 7 feet in width approximately), the user requires three rolls to cover the entire wall. This is an approximation and depends on other factors such as condition of the wall, dimension of the room. The images represent actual product though color of the image and product may slightly differ. (HOW TO APPLY WALLPAPER) 1.MEASURE YOUR WALL If a particular wall is 10 feet in height and 10 feet in width, then the total area of the room is (1OX1O)= 100 sqft. If a roll dimension is 0.53 mtr X 10.05 mtr = 57sqft, the average utilization of a roll being 5O sqft .The user requires two rolls to cover the entire wall. 2. CLEAN THE WALL SURFACE Make the wall surface even, where you are planning to paste the wall covering. Wipe the dust off the walls with a damp sponge. Let it dry; make sure your wall is primed before applying the wallpaper. Please Note that wall should be absorbent in nature. 3. MATCH n CUT Cut the wallpaper according to the wall's size, and then match the pattern. Accordingly so that the pattern of the second strip matches with the First strip. 4. APPLY ADHESIVE Keep the wallpaper on a flat surface and apply adhesive on its backside if its paperback wallpaper. In case if it is non-woven wall paper you can apply adhesive directly on the wall. 5. APPLYING WALLPAPER Start pasting the wallpaper on your wall (as shown in Fig 5a). Start pasting the roll sidewise while matching the pattern (as shown in Fig 5b). Smooth the wallpaper once pasted using the smoothing brush.
