SPECIAL FEATURES :
ï‚— AmpTip (TM) low-current range calibrated at Jaw-tip for slim-conditions for accurate readings
ï‚— MAX / MIN Recording mode.
ï‚— MAX / MIN Crest (Peak-Hold) mode.
ï‚— Relative-zero mode
ï‚— Display Hold
ï‚— EF-Detection (NCV).
ï‚— Back-lighted easy-to-read LCD display
ï‚— Fully Autoranging
ï‚— BeepLit (TM) Feature.
GENERAL SPECIFICATIONS :
ïƒ Sensing : True RMS
ïƒ Jaws Opening size : 26mm Max.
ïƒ Display : 3-5/6 digits 6000 counts
ïƒ Update Rate : 5 per second nominal
ïƒ Polarity : Automatic
ïƒ Operating Temperature : 0ºC to 40ºC
ïƒ Relative Humidity : Maximum relative humidity 80% for temperature up to 31ºC decreasing linearly to 50% relative humidity at 40ºC
ïƒ Altitude : Operating below 2000m
ïƒ Storage Temperature : -20°C ~ 60°C, \ <80% R.H. (with battery removed)
ïƒ Temperature Coefficient : Nominal 0.1 x (specified accuracy) / °C @ (0°C –– 18°C or 28°C –– 40°C), or otherwise specified
ïƒ Power Supply : Standard 1.5V AAA Size Battery X 2
ïƒ Power Consumption : typical 4mA
ïƒ Low Battery : Below approx. 2.85V for Capacitance & Hz
Below approx. 2.5V for other functions
ïƒ APO timing : Idle for 32 minutes
ïƒ APO Consumption : typical 5uA
ïƒ Dimension : 188(L) x 66(W) x 32(H)mm
ïƒ Weight : approx 158 gms.
SAFETY :
ï‚— Safety : Certified per IEC/UL/CSA_C22.2_# / EN standards.
61010-1 Ed.3.0, 61010-2-032 Ed. 3.0,61010-2 033 Ed. 1.0 & 61010-031 Ed. 2.0 to
Measurement Categories: CAT III 600V AND CAT IV 300V AC & DC.
ï‚— Overload Protection :
Current via jaws : 600A DC / AC rms at <400Hz.
Voltage via terminal: 660V DC / 920VAC rms.
Other functions via terminals : 600V DC / VAC rms
ï‚— Pollution Degree : 2
ï‚— E.M.C. : Meets EN61326-1
DCA and ACA Functions, in an RF field of 1V/m :
Total Accuracy = Specified Accuracy + 40 digits at around 87MHz
DCuA & Ohm Functions, in an RF field of 1V/m :
Total Accuracy = Specified Accuracy + 25 digits
Other Functions, in an RF field of 3V/m :
Total Accuracy = Specified Accuracy + 20 digits
ï‚— Transient Protection : 6.0kV (1.2/50us surge)
ï‚— Rugged Fire retarded housing.
ï‚— LVD EN61010-1/61010-2-032/61010-2-033 to CAT III 600V & CAT IV 300V
