NOBLE ITALIA HI GLOSS MARBLE POLISHING POWDER (3 KGS PACK)
NO 1 PRODUCT FOR POLISHING ITALIAN MARBLES
1) 50% Extra Shine than any other product.
2) Long Lasting Shine
3) Very Easy to Use
4) 20% Faster Results
5)100% Safe to Use
• Ready to use powder for polishing and restoration marble floor.
• Use 2.5 - 3 hp single disc machine with min. 175 RPM with weighing min. 65 KGS.
• For polishing marble, use with 3m red polishing floor pads after 5000 no diamond pads You can use any good quality brand of diamond pads.
• Dosages /Dilution: Make the solution with 3-4 spoon of powder in 100 ml of water on 6 sq ft area. Slowly add the water to the powder and shake the mixture to homogeneous thick slurry. Since, buffing will produce heat and evaporate water. Add more water if required while polishing.
• Buff the floor with 2 mins/sq ft. Vaccum or wipe off rest of the slurry. Wash with water and clean the polished area. It will create a high reflective finish as seen on polished marble tiles and slabs
1. USE AS THICK SLURRY BY ADDING SLIGHT AMOUNT OF WATER AND THEN BUFF.
ADD VERY LITTLE AMOUNT OF WATER IF REQUIRED WHILE BUFFING.
2. DO NOT DRY THE POWDER. THIS IS WET POLISHING.