ABOUT NULON ENGINE TREATMENT
Nulon Engine Treatment is the greatest innovation in lubrication technology. This unique formula that contains activated PTFE (Poly Tetra Fluoro Ethylene, the slipperiest substance known to science) and other special additives, eliminates friction and smoothens the engine thus ensuring enhanced performance and total protection which helps in significantly increasing the life of vehicles.
The major cause of component failure in any lubrication system is heat and wear & tear caused by friction. When two surface move in opposite directions, the peaks of the surfaces interact causing an abrasive action resulting in friction. Also, during normal running of the vehicle the irregular porous surfaces of the engine get clogged with carbon and sludge leading to loss of power, higher fuel consumption and increased wear and tear. In order to prevent such damage, using engine oil alone is not sufficient. The ultra-fine sub-micron particles of activated PTFE present in Nulon engine oil cleans the surface of all its impurities and subsequently forms an active and uniform protective film of 0.5 micron on the moving parts of the engine, eliminating friction to a near zero level and ensuring protection of engine and great benefits that no other engine oil can offer, allowing the engine to reach its true potential and deliver a good performance.
HOW DOES NULON ENGINE TREATMENT WORK
1. Nulon Engine Treatment is formulated with activated PTFE (Poly Tetra Fluoro Ethylene) and other special proprietary additives blended into the base oil. The activated PTFE content in Nulon Engine Treatment is inert and is not affected by acids, rust, corrosion, minerals, gases and other negative elements that are formed and found inside the engine.
2. The activated PTFE forms an active protective film on all the engine parts and moving parts of the engine thereby preventing metal-to-metal contact and enhancing the lubrication by eliminating friction to near zero levels.
3. This film prevents the acid/gases etc. formed during combustion of adulterated petrol to get in direct contact with the metal surface of the parts in the engine and thereby preventing the acid from doing any harm to the metal parts in the engine.
BENEFITS
- Protects the engine from the detrimental effects of adulterated fuel.
- Average increase in fuel efficiency by 3% - 7%.
- Eliminates friction and subsequently reduces wear and tear inside the engine, saving downtime and maintenance costs.
- Increases compression, ensuring more power and better pick up.
- Reduces smoke emission levels.
- Reduces noise & vibration.
- Smoother and quicker start-ups.
- Prevents damages to the engine due to cold start-ups.
- Increases the resale value of the vehicle.
- Suitable for application to cars/two-wheelers/SUVs/trucks
APPLICATION RATES
- One can of Nulon E-25 Supreme Engine Treatment 350ml is suitable for all new and used cars, SUVS and jeeps.
LIFE AND AVERAGE COST PER KILOMETER
Each application is effective for 15,000kms or 6 months whichever is achieved earlier. The average cost for two wheelers works out to one paisa per km.
DIRECTION FOR USE FOR MAXIMUM BENEFITS:-
Step 1 Run engine for some time to ensure that engine is at normal operating temperature.
Step 2 Turn off or stop the engine once it is at normal operating temperature.
Step 3 Shake Nulon Engine Treatment can vigorously for at least two minutes (as applicable with reference to the kind of vehicle; check application rates mentioned above).
Step 4 For 4 Stroke engine add contents of the can to the engine oil sum.
Step 4 For 2 Stroke engine add contents of the can to the petrol tank (there should be at least 2 litres of petrol in the tank).
Step 5 Restart engine.
Step 6 Run/Drive engine for at least 20 minutes after application.
Stop engine, immediately drain oil & remove oil filter.
Install new oil filter & re-fill new engine oil as recommended by OEM.
For maximum engine protection add Nulon E-25 Super Engine Treatment after adding fresh Engine oil.
About G-70
Nulon G-70 combines a balanced blend of PTFE with a synthetic anti-friction lubricant and an anti-corrosion additive. It is suitable of use with all synchromesh rings, limited slip differentials and all types of gear boxes. PTFE is the slipperiest substance known to science which provides the lowest co-efficient of friction thereby enhancing performance.
The transmission of a vehicle is normally neglected by users although both the gearbox and differential bear the brunt of the vehicles load. Conventional and mandatory gear and differential oil need to be further supplemented by high quality lubrication which enables vehicles to perform beyond their rated capacities.
When added to the gearbox or differential, G-70, dramatically and immediately improves vehicle performance by.
1. Reducing friction in the gearbox and differential.
2. Providing a cushioning effect to the mating teeth of the gears.
G-70 impregnates metal surfaces and provides residual lubrication leading to long lasting benefits that no other gear and differential oil can provide.
G-70 is also suitable for use in all types of industrial and marine gear boxes, as it reduces friction and consequently the energy required to drive gear boxes.
Industrial applications include, Worm Reduction Gears, Bevel Gears, Spiral Gears, all Synchromesh Rings and Limited Slip differentials.
Benefits
1. Reduced friction and noise
2. Reduced operating temperature
3. Reduced oil leakage
4. Extended life of components and bearings
5. Protection against corrosion of bearing surfaces.
6. Smoother gear changes
7. Residual lubrication during lay-up periods
8. Extended life of the gearbox and differential oil
Application Rates
All Cars consume 1 Bottle of 125gm in Gearbox and 1 Bottle in Differential.
Industrial and others 4 to 5% of the gear oil sump capacity.
Directions for Use
Shake bottle vigorously for 2 minutes and add full contents to gearbox and/or differential.
For maximum benefits, repeat applications with each major service.
