WATER DRYRUN GUARD- SINGLE PHASE (MODEL- WDG-C1)
PRODUCT DESCRIPTION/FEATURES
*Many a time, it happens that, water in the bore well/well aquifer discharge is less than motor pump discharge, and the water coming out of the motor pump is not continuous.
*The motor pump which is submerged in water will give water till it is having sufficient water in bore-well. In case of insufficient water (when water level goes down), then the motor pump runs without giving water which is called dry running of motor pump.
*Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time.
*Our product LIDER Water Level Guard prevents the motor pump from dry running and thus
subsequent burnout.
*When water in the bore-well falls below a set level (set by our sensing probe) often installed above the motor pump, a signalis sent initiating a trigger.
*Thus LIDER Water Level Guard will switch OFF the motor pump AUTOMATICALLY as per set level
position of sensing probe.
APPLICATION
All Single phase motor pumps connected with contactor control panel and all water coolers.
Our products are ideally suitable for water supply in houses, bungalows, offices, hospitals, factories, hotels & restaurants, apartments,multistory buildings, commercial centers and all places where motor pumps are installed in bore-well /wells.
Please raise your query or ask connection diagram for connecting of product through email- liderelectricinfo@gmail.com or call at our helpline no 0761-2757173.
ADVANTAGES
Small device, Saves Water, Electricity and Time.
Auto and Manual switch provided for bypass condition also.
Easy to install in all kinds of deep borewells/wells.
LED Indicator for water full (green) & water empty (red).
NO maintenance required. Solid state PCB inside.
Prevents the motor pump from burnout.
Product directly going from Manufacturer to Consumer
TECHNICAL DETAILS
Voltage(V)- 220~240 VAC,50 Hz.
Relay Output-5 amps 240 VAC [R]
Horsepower(HP) -any HP rating pumps
Pre wired terminals for easy connection.
Sensor to add.
Enclosure-ABS Electrical Grade Plastic Molded.
Mounting-Panel mounting /Screw type.
Connection diagram provided with Nuts and Screws.
Quality control - Govt. C.P.R.I. Bhopal Tested and Certified.
Warranty-Six months against any manufacturing defect.
Packing Box- 3 layer Corrugated
Please raise your query or ask connection diagram for connecting of product through email- liderelectricinfo@gmail.com or call at our helpline no 0761-2757173.
Product color - BLACK, Product Dimensions - 102mm*35 mm*81 mm, Weight - 325 gms. (approx.)
Disclaimer - Product color may vary slightly. Product improvement is a continuous process. Contact for any changes.