General instructions on how to use a nebulizer: Put the compressor on a flat surface where it can safely reach an outlet. Check to make sure all the pieces are clean. Wash your hands before prepping. If premixed, place it in the container. If you need to mix it, measure the correct amount, and then place it in the container. Connect the tube to the compressor and the liquid container. Attach the mouthpiece or mask. Turn on the switch and check to see that the nebulizer is misting. Put the mouthpiece in your mouth and close your mouth around it or put the mask securely over your nose and mouth, leaving no gaps. Slowly breath in and out until is gone. This may take five to 15 minutes. Keep the liquid container upright throughout the treatment.
- Durable piston nebulizer
- Transport and storage humidity range:10 to 95% RH, Dimension (Length x Width x Height ):270 mm x 200 mm x 110 mm, Weight:2.0kg (4.40 Lbs)
- Power:AC 230 V / 50HZ, Current:Around 0.7 A, capacity :6 ml, Particle size:0.5 to 10 um, MMAD:4 um, Sound level:Around 58 dBA, Average nebulization rate:Min 0.2ml / Min, Compressor pressure range:35 to 50 Psi, Operation pressure range:8 to 16 Psi (50 to 100 Kpa / 0.5 to 1.0 bar)
- Nebulizer, air tube, mouthpiece, mask, filter (5pcs)
- Liter flow range:6 to 8 lpm Operating temperature range :10 `C ~ 40`C (50F to 104 F) Operating humidity range:10 to 95 % RH Transport and storage temperature range:Minus 20`C ~ 70`C (. minus 4F to 158F )
