SPECIAL FEATURES :
VFD-V & VFD-Hz in Dual Display
5msCREST-MAX capture mode (Peak Hold)
Autoranging Relative -Zero mode
Display Hold
EF-Detection (NCV)
Beep-Jack input warning
Hz Line Level Frequency
Hz Logic Level Frequency
Diode Test
Continuity Test
GENERAL SPECIFICATIONS
Sensing : Average sensing
Display : 3-5/6 digits 6000 counts + 3 digits 999 counts dual LCD display
Update Rate : 5 per second nominal
Polarity : Automatic
Low Battery : Below approx 2.4V
Operating Temperature : 0 C to 40 C
Relative Humidity : Maximum 80% R. H. For temperature upto 31oC decreasing linearly to
50% Relative Humidity at 40oC
Altitude : Operating below 2000m
Storage Temperature : -20oC to 60oC, < 80% R.H. (With battery removed)
Temperature Coefficient : nominal 0.15 x (specified accuracy) / °C @ (0oC--18oC or 28oC--40oC), or otherwise specified
Power supply : Standard 1.5V AAA Battery x 2.
Power Consumption : 5.4mA typical
APO Timing : Idle for 34 minutes
APO Consumption : 10mA typical
Dimension : 186(L) x 87(W) x 35.5(H) mm ; 198(L) x 97(W) x 55.5(H) mm with Holster.
Weight : Approx. 340 gms; 430gm with holster.
SAFETY :
Double insulation per IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed., & CAN/CSA C22.2 No. 61010.1-0.92 to Category II 1000V, CAT III 600V & CAT IV 300V AC & DC.
Transient Protection : 6kV (1.2/50ms surge)
Terminals (to COM) Measurement Category :
V : CAT II 1000V, CAT III 600V & CAT IV 300V AC & DC.
uAmA : CAT III 500Vac & 300Vdc.
A : CAT III 600Vac & 300Vdc.
EMC : Meets EN61326-1:2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)
In an RF field of 3V/m :
Capacitance function is not specified
Other function ranges : Total Accuracy = Specified Accuracy + 100 dgts
Performance above 3V/m is not specified.
Overload Protection :
mA & mA : 0.63A/500Vac, IR 50kA or better, F Fuse
A : 10A/600Vac, IR 100kA or better, F Fuse
V : 1050 Vrms, 1450 Vpeak
