IR 4 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler. SPECIAL FEATURE - Memory backup EEPROM Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Comes with Custom Built SLEEK REMOTE as shown in picture Features: 100% BRAND NEW and TESTED 4 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors etc. Each Relay can switch ON or OFF individually Equipped with four 7A / 250AC Relays Each Relay can control any equipment in Latch Mode (Toggle on each key press) Relay contacts are brought out as Screw Terminals Remote operating range up to visible distance (5-10 meters) Master ON/OFF button can Turn ON / Turn OFF all relays at once Compact 3v Battery Operated Remote Receiver Indicates output status by LED Receiver operates from 230 Volt AC power supply Relay contacts are brought out as Screw Terminals IR Sensor can be extended outside the switch board High Quality Unbreakable PCB that can easily be mounted inside regular switchboard at home or office Board Dimension: 14.3 x 9.3 CM Applications: Wireless Remote control of Lights and Fan at home or office Wireless Remote control of Projectors and speaker system in multimedia Security and burglar alarm systems Control of motors and system in Robotics Smoke and fire alarm systems Garage door controllers Car door controllers Other remote control systems Specifications: Transmitter (Remote): Operating Voltage 3.0V Battery Range of Operation Approx 5-10 Meters Receiver: Operating Voltage 230 Volt AC Infrared Detector Frequency 38 kHz Package Contents: IR 4 CH Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module 1 x Remote Control (same as shown in picture)
