Emergency Vehicle breakdown ToolKit from Toolzano. It can Jumpstart all Cars, Jeeps, SUVs, Bikes, Scooters, Motorboats and can charge all Smart Phones, iphones, Tablets, Digital Camera. It also has an inbuilt white LED torch. All accessories & User manual are included in package. Usage instructions as follows. CHARGING THE JUMPSTARTER: Use the AC adaptor (included in package) or Car adaptor (included in package) to charge the Jumpstarter device. JUMPSTARTING VEHICLES: 1) Use the Red-Black Jumper cable (included in package) to jumpstart your vehicle. 2) Connect the Red clamp of the Jumper cable to the vehicle's Positve Battery terminal and Black clamp to the Negative battery terminal. Note: (+) & (-) signs will be engraved in the jumper cable and the vehicle battery. 3) Plug the Jumper cable into the Jumpstarter. 4) Switch the Jumstarter ON by pressing the Side button. 5) Start your vehicle. The peak current of 400A from the Jumpstarter gives your Car a hair-raising Start. 6) Once the Vehicle starts disconnect the clamps from the battery. CHARGING SMARTPHONES: Use the 4-in-1 connector (included in package) to charge your phone/Tablet. USING LED TORCH:Long press the side button for 2 seconds for bright white Light to appear. Press it again to off the light. AUTO-OFF: The jumpstarter switches off automatically when not in use to ensure maximum battery preservation. Since the Jumpstarter can be charged inside your car, you can permanently place it in the car and never worry about Car breakdown, Phone out of charge and need for bright light in case of emergency. An original product exclusively from TheCitiShop.