The VMS LM Deluxe laminator is the perfect companion for all your daily lamination needs. Whether you need to preserve those photo memories or take care of the utter important Paper,it covers all. You can even laminate ID , letters or create a spill proof recepie book for your kitchen, the possibilities are endless. VMS Professional LM Deluxe Lamination / Laminating Machine VMS LM Deluxe laminator has been specially designed with rigidly built rollers for precision drive control. Built for professional use, this A3 class laminator is ideal for 216 x 279 mm stock (8.5 x 11 inches) in landscape mode for maximized output. It is compatible with most types of laminating pouch films. it is suitable for both hot and cold functions with forward and reverse operations. The laminated item remains completely flat and is resistant to climatic changes, water, fading and abrasions. Technical Specifications :- Model : LM Deluxe Laminating Width, max : 320mm Laminating speed : 475mm / minute Operating temperature : 90°C to 180°C Drive : AC geared motor Heating System : IR lamp Rollers : 4 Roller diameter : 20.5mm Item thickness : <_1.2 mm Power : 400 W Voltage : 230VAC 50HZ Dimensions (W x L x H) : 445 x 175 x 90 mm Machine Weight : 5 KgFeatures : ​Sturdy and durable construction. Easy, reliable and economical operation. Advance and retreat functions. Silent and efficient drive system. Wide temperature adaptability. Integrated chip out. Bubble free lamination. Complete Metal Body. Shockproof Build Quality. High quality power cable. Operation : Connect the machine to the power supply (230V 50Hz). Turn the power on by switching to start position - the power light will turn red. Then press hot position the roller will start to heat up and the operation light will turn green. The temperature can be set according to the pouch film thickness (see the table for indicative temperature settings). If the Film thickness is not known, make a test run with the temperature control set to the lowest position. wait for 3 minutes for the heater to reach the set temperature during which the operating light turns green. Wait for 1 minute, the light will go off and then switch on again. This indicates the machine is now ready for lamination. Place the item between the two layers of the pouch film and always insert the closed end of the pouch film into the slit in the front side of the laminator. The laminated item will emerge after few seconds at the back of the laminator. In case when placing the film in the machine, the item shifts position or appears skewed, press the reverse switch. The Film will return out. re-position the item properly and re-insert into the machine. The temperature adjustment is to be done according to the film thickness and material. If the temperature is too low, the laminated item will be not appear clear and if the temperature is too high, the lamination will have wrinkles. Increase or decrease the temperature accordingly. Caution : Ensure the pouch film is always inserted with the sealed end, otherwise it could lead to the film wrapping around the rollers or getting crumpled. Keep and store the machine in a cool and dry places away from other flammable items. Do not Spill water or other liquids on the machine while it is in operation. Please ensure the machine is properly connected to the ground line. Before turning the machine off, set the temperature control to cold position. Wait for 2 minutes and then disconnect the power. This will ensure the roller is running and cools down properly before it stops rotating. Clean the rollers with a soft cloth and propyl alcohol periodically to avoid film wrap around rollers. Do not use benzene or other thinners for cleaning. Disconnect the power before opening the machine for cleaning or repairs.
