| Wireless |
|---|
| Spec/modulation |
Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM |
| Antenna gain in dBi |
2 |
| Transmit power |
Transmit power @ normal temp range for FCC: 802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX, 802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX, 802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14, 11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0-5/8-13, 16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15, 21.5 dBm @ 3TX@MCS0-5/8-13, 17.5 dBm @ 3TX @ MCS6/14, 15.5 dBm @ 3TX @ MCS7/15, Transmit power @ normal temp range for ETSI: 11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX |
| Receiver sensitivity |
802.11.n: 300 Mbps at -69dBm, 802.11.g: 54 Mbps at -73dBm, 802.11.b: 11 Mbps at -88dBm |
| External antennas |
3 (omnidirectional) |
| Internal antennas |
None |
| Channels |
Operating channels: 11 North America, 13 most of Europe (ETSI and Japan) |
|
| In The Box |
|---|
| Package Contents |
Cisco WAP4410N Wireless-N Access Point with PoE, User guide on CD-ROM, Ethernet network cable, Power adapter, Product stands, Registration card |
|
| Environmental |
|---|
| Dimensions (W x H x D) |
(170 x 170 x 40.7 mm), 6.69 x 6.69 x 1.60 in |
| Operating humidity |
10% to 85%, noncondensing |
| Storage humidity |
5% to 90%, noncondensing |
| Storage temperature |
Minus 4Deg to 158DegF (-20Deg to 70DegC) |
| Weight |
0.86 lb (39 kg) |
| Power |
12V 1A DC input, and IEEE 802.3af compliant PoE, Max power draw: 10.1W |
| Certification |
FCC, CE, IC |
| Operating temperature |
32Deg to 104DegF (0Deg to 40DegC) |
|
| Other Details |
|---|
| Country of Origin or Manufacture or Assembly |
India |
| Common or Generic Name of the commodity |
Wireless Access Points |
| Manufacturer's Name & Address |
|
| Packer's Name & Address |
|
| Marketer's Name & Address |
|
| Importer's Name & Address |
|
|
| Warranty |
|---|
| Period |
5 Years Warranty |
|
| Specifications |
|---|
| Cabling type |
Unshielded twisted pair (UTP) Category 5e or higher |
| Ports |
Ethernet, Power |
| Buttons |
Reset |
| LEDs |
Power, Ethernet, Wireless, PoE |
| Standards |
Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM |
| Operating system |
Linux |
|
| Network Capabilities |
|---|
| SSID to VLAN mapping |
Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains |
| Spanning Tree |
Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system |
| 802.11d regulatory domain |
Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains |
| Operating modes |
Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode |
| Load balancing |
Allows bandwidth control with user-defined CPU usage ratios |
| Multiple BSSID |
Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points |
| VLANs |
Supports 802.1q - up to 4 VLANs |
| Auto-channel selection |
On boot-up, the access point selects the least congested channel |
|
| Minimum Requirements |
|---|
| Web-based configuration |
Java-enabled web browser |
| Requirements |
802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC, Switch/router with PoE support or PoE injector when used with PoE |
|
| Management |
|---|
| Simple Network Management Protocol (SNMP) version |
SNMP version 1, 2c |
| Event logging |
Event logging, Email logging, Remote syslog |
| HTTP Redirect |
Redirects initial user access to an external web server to display company logo or network usage policy |
| Diagnostics |
Flash, RAM, LAN, WLAN |
| Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
| Web firmware upgrade |
Firmware upgradeable through web browser |
| IPv6 host |
Support for management and control of access point over IPv6, Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements) |
|
| Setup/Configuration |
|---|
| Web user interface |
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
|
| Security |
|---|
| Access control |
Wireless connection control: MAC-based |
| 802.1X |
Wireless clients can be authenticated through IEEE 802.1X |
| RADIUS server |
Up to 2 RADIUS servers can be configured for redundancy purposes |
| WEP/WPA/WPA2 |
Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT |
| SSID broadcast |
SSID broadcast enable/disable |
| Client isolation |
Supports wireless client isolation between and within SSIDs |
| Rogue access point detection |
New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network |
| WPS |
Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network |
| 802.1X supplicant |
Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network |
|
| Quality of Service |
|---|
| QoS |
4 queues, 802.1p VLAN priority, WMM wireless priority, Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS |
|
